HOME > PRODUCTS
PRODUCTS

GT Series Pneumatic Turbine Vibrator
Construction:

1 - Extruded aluminum alloy body
2 - Aluminum turbine wheel, hard coated
3-4 - High density mass for positive moment
5-7 - Cavities for negative moment
8 - Air inlet (BSP thread, will accept NPT)
9- Air exhaust (BSP thread, will accept NPT) 
10 - Base mounting holes
11 - Special pre-lubricated shielded bearings
12 - Hard coated aluminum end plate with left-handed thread 
13 - Hard coated aluminum end plate with right-handed thread      
A high speed range and eccentric working moments are combined in these vibrators to produce a powerful vibration.
 
Dimensions:
  A B C D E F G/H Weight
Model mm inches mm inches mm inches mm inches mm inches mm inches BSP Thread kg Lbs
GT-4 40 1.57 28 1.1 70 2.76 56 2.2 10.5 0.41 6 0.24 1/8" 0.165 0.36
GT-6 0.17 0.36
GT-8 50 1.97 33 1.3 86 3.38 68 2.68 12 0.47 7 0.27 1/8" 0.25 0.55
GT-10 0.255 0.56
GT-10-S  0.263 0.58
GT13 65 2.56 42 1.65 113 4.45 90 3.54 16 0.63 9 0.35 1/4" 0.565 1.24
GT-16 0.58 1.28
GT-16-S  0.614 1.35
GT20 80 3.15 56 2.2 128 5.04 104 4.09 16 0.63 9 0.35 1/4" 1.09 2.4
GT-25 1.12 2.46
GT-25-S  1.2 2.64
GT30 100 3.94 73 2.87 160 6.3 130 5.12 20 0.79 11 0.43 3/8" 2.2 4.85
GT-36 2.3 5.1
GT-36-S  2.53 5.57
GT40 120 4.72 83 3.26 194 7.64 152 5.99 24 0.94 17 0.67 3/8" 3.69 8.13
GT-48 3.89 8.57
GT-48-S  4.29 9.45

* will accept NPT