HOME > PRODUCTS
PRODUCTS

 

GT Series Pneumatic Turbine Vibrator
Fearture:

The vibration is produced by the central force of the positive and negative unbalanced moments in the rotor
The rotor is supported on two heavy duty, prelubricated, matched shielded ball bearings. A special long life grease ensures a long working life.
The inner and outer raceways of the bearings are designed so that the bearings can be easily replaced using only a pin-wrench.
The endplates are fitted with right- and left-hand threads and are self-locking.
Application:
NO LUBRICATION only clean air is required
Maximum temperature 120? ?250?
Noise level range 60 to 75 DBA
The body is made from an extruded stove enamelled aluminium section and the hard coated end plates enables the vibrators to be used in the food and pharmaceutical industries.
The GT-Turbine vibrators conform to current international noise regulations under factory test conditions.
 
Performance:
  Frequency  Centrifugal force Air consumption / Minute
min-1 x 1000 
Model 2 Bar 4 Bar 6 Bar 2 Bar 29 PSI 4 Bar 58 PSI 6 Bar 87 PSI 2 Bar 29 PSI 4 Bar 58 PSI 6 Bar 87 PSI
29 PSI 58 PSI 87 PSI N LBS N LBS N LBS Ltr. CF Ltr. CF Ltr. CF
GT-4 14 15 15 135   180   200   33   58   83  
GT-6 11.5 12 12.5 130 175 210
GT-8 36 42 46 990 223 2060 464 2910 655 46 1.6 80 2.8 112 3.9
GT-10 27.5 35 37.5 840 189 1390 313 2400 540
GT-10-S  17.0  23.0  25.0  650  146  1350  304 1950  439 
GT13 26 30 33 1400 315 2440 549 3730 839 120 4.2 200 7 290 10.2
GT-16 17 21.5 24 1220 275 2090 470 3160 711
GT-16-S  11.5  15.5  17 1100  248  1900  428 2700  608 
GT20 17 20 23 2170 488 4040 909 5520 1242 185 6.5 325 11.4 455 15.9
GT-25 12 15.5 17 2120 477 3510 790 5070 1140
GT-25-S  8.5  11.0  13.0  2250  506  3600  810  4900  1102 
GT30 13 14 16 3380 760 5430 1222 7540 1696 330 11.5 530 18.5 745 26
GT-36 8 10 13 3290 740 5360 1206 7190 1618
GT-36-S  6.1  7.2  8.3  4100  922  6200  1395  7500  1688 
GT40 7.7 8.8 9.5 4300 968 7300 1642 9800 2205 425 15 700 24.6 970 34.2
GT-48 6 7.5 9.7 4900 1102 7700 1732 10500 2363
GT-48-S  0.0  5.6  6.3  0  0  7500  1688  12000  2700 
* Data obtained with a Kistler 3axis dynamometer on a heavy laboratory test block and displayed by Kistler control 
monitor (COMO). Frequency and force will decrease on a less rigid mount. Specificationssubject to change 
without notice or obligation.